How to care for RENO wooden sliding doors and furniture? A guide to maintaining oiled surfaces
Oil-finished wooden sliding doors and furniture do not require complicated maintenance. Regular cleaning, prompt removal of stains, and periodic surface refreshment will keep the natural look of the wood for many years.
At RENO, we use Rubio Monocoat oils to finish our wooden sliding doors and furniture. That's why, for routine care and occasional maintenance, we recommend using products developed by the same manufacturer.
Our customers most frequently ask us about everyday cleaning, stain removal, and how often oiled wood should be refreshed. That's why we've prepared this practical guide, explaining step by step how to care for RENO oil-finished wooden sliding doors and furniture.
Everyday cleaning of wooden doors and furniture
Rubio Monocoat Surface Care Spray
When to use: For the regular cleaning of wooden sliding doors and furniture. Ideal whenever you want to quickly refresh the surface without having to dilute concentrated cleaning products.
How it works: Removes dust and everyday dirt while helping to preserve the wood's natural matt appearance. It leaves no streaks, residue or sticky film on the surface.
How to use: Spray a small amount of the product onto the surface, then wipe it with a clean, soft microfibre cloth.
Good to know: The product is gentle on wood and contains no harmful volatile organic compounds (VOC).
How to remove tougher stains?
Not every mark or stain requires surface restoration. In most cases, using the right cleaning product is all that's needed. In our experience, the most common types of dirt are everyday surface deposits and localised grease stains.
All Natural Wood Cleaner Spray
When to use: For more thorough cleaning of wooden sliding doors and furniture, removing stubborn dirt, and preparing the surface before applying a maintenance oil.
How it works: Effectively removes dirt whilst preserving the natural appearance of the wood. Thanks to its active microorganisms, it also helps reduce dust build-up and slows down the accumulation of new dirt.
How to use: Spray the product onto the surface, leave it to work for a short time, then wipe with a clean microfibre cloth.
Good to know: The product has a neutral pH and a 0% VOC formulation, making it suitable for regular use in living spaces.
Rubio Monocoat Grease Remover
When to use: For spot removal of fresh grease stains from worktops, furniture fronts and frequently touched areas such as around door handles.
How it works: Removes fresh grease and oil stains, as well as other stubborn marks such as those left by markers or polishing compounds. It is safe to use on surfaces finished with Rubio Monocoat oil.
How to use: Apply the product directly to the stain and leave it for a few minutes. Then gently blot the area with a paper towel or a dry cloth and finally wipe the surface with a slightly damp cloth.
Good to know: For the best results, remove grease stains as soon as possible after they occur.
When should an oiled surface be refreshed?
Surfaces finished with Rubio Monocoat oil do not need to be re-oiled every year. However, after several years of use, areas exposed to frequent contact may begin to show signs of wear. This is most common around door handles, on worktops, or on furniture fronts.
Universal Maintenance Oil 2 Mix
When to use: Every few years, or whenever the surface begins to lose colour intensity, becomes dull, or looks dry in the most frequently used areas.
How it works: It bonds only to areas of the wood that are no longer fully protected, allowing the finish to be refreshed exactly where it is needed. This means the most heavily used areas can be restored without refinishing the entire surface.
How to use: First, thoroughly clean the surface using All Natural Wood Cleaner Spray. Then mix the oil components, apply a thin, even coat following the direction of the wood grain, and after a few minutes carefully remove all excess oil with a clean cotton cloth. Leave the surface to cure for 12–24 hours.
Good to know: The product is certified as 0% VOC, complies with the EN 71-3 standard for toy safety, and is suitable for use on surfaces that come into contact with food.
What to avoid when caring for oiled wood?
Surfaces finished with Rubio Monocoat oil are easy to maintain, but using unsuitable cleaning products can reduce their protective properties or alter the wood's natural appearance.
- Do not use aggressive detergents – they can weaken the protective finish and dry out the wood.
- Avoid products containing wax, silicone or polishing agents – they can change the appearance of the wood and make future maintenance more difficult.
- Do not leave spilled liquids on the surface – water, coffee, wine and grease should be wiped away as soon as possible.
- Never scrub the surface with abrasive sponges or scouring pads – a soft microfibre cloth is all you need.
Why do we recommend Rubio Monocoat products?
At RENO, we use brushed timber and protect it with Rubio Monocoat oils. This finishing technology preserves the wood's natural look and texture while allowing individual areas to be refreshed without refinishing the entire surface. It is this combination of durability, ease of maintenance and a natural appearance that led us to choose Rubio Monocoat for finishing our sliding doors and furniture.
Rubio Monocoat care products have been specifically developed for oil-finished wood surfaces. They help remove dirt, refresh the finish and preserve the wood's natural appearance without creating additional layers on the surface.
Everyday safety is equally important to us. Many Rubio Monocoat products comply with stringent standards for volatile organic compound (VOC) emissions and indoor air quality. Selected products also carry additional certifications confirming their safety for use on surfaces that come into contact with food.
This approach reflects RENO's philosophy. We create durable products from natural materials and recommend solutions that help preserve their appearance, functionality and comfort of use for many years to come.
Regular care takes only a few minutes but helps maintain the natural appearance of the wood and extend the lifespan of RENO sliding doors and furniture for many years.
Frequently Asked Questions (FAQ)
How often should I clean oil-finished wooden sliding doors and furniture?
Simply remove dust and everyday dirt on a regular basis. How often you need to clean depends on how frequently your sliding doors or furniture are used.
How do I remove a grease stain from oil-finished wood?
For the best results, remove grease stains as soon as possible. Fresh grease stains are best treated with a cleaner specifically designed for oil-finished wood surfaces, such as Rubio Monocoat Grease Remover.
Can oil-finished wood be repaired locally?
Yes. One of the key advantages of the Rubio Monocoat technology is that individual areas can be repaired or refreshed without sanding the entire door or piece of furniture.
Do wooden sliding doors need to be re-oiled every year?
No. With standard use the finish usually only needs refreshing after several years, particularly in areas exposed to frequent contact and wear.
Can I clean oil-finished wood with water?
Yes, but only with a slightly damp cloth. Excessive moisture should be avoided, so any spilled liquids should be wiped away as soon as possible.
